Hydraforce Standard Kit

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

£120.00 (Inc VAT)

This kit will fit

The Standard kit will fit exhausts that match the dimensions in the pictures below.

Exhausts with these dimensions are commonly found on:

  • KTM EXC/SX/XC 200cc, 250cc and 300cc 
  • Husqvarna TE/TC 250cc and 300cc
  • Beta RR 250cc and 300cc

Please check your exhaust matches the dimensions shown on the pictures before you purchase.

Watch the video to see how it works

17 in stock

Category:

Description

The Hydraforce blow out kit is a precision engineered tool, designed to seal each end of your exhaust under high pressure. It is machined in the UK from brass and carbon steel. The kit comes complete with a very capable imported hand pressure pump.

Everything you need to blow dents out of your exhaust is included in this kit. All you need to provide is water and a few spanners. Simply fit the tool to each end of the exhaust, fill with water ( Please read the warning below) then pressurise with the pump provided. The pressure will push the exhaust back to its original shape, without any discoloration.

The kit includes 

  • 50mm fitting for the barrel end
  • 30mm fitting for the silencer end
  • Hand pressure pump
  • 40mm spanner
  • O rings and spare O rings

You Will need

  • 10mm Spanner or socket
  • 22mm Spanner
  • 27mm Spanner or socket
  • Soft head mallet

 

Warning

High pressure can be very dangerous and cause serious injury or death. This tool should only be used by a competent person and they do so at their own risk, keep children away whilst this tool is in use. The manufacturer or suppliers of this tool do not take responsibility of any accident or injury.

IT IS VERY IMPORTANT TO MAKE SURE ALL THE AIR IS REMOVED FROM THE SYSTEM PLEASE WATCH THE “HOW TO USE” VIDEO

Compressed air is like a compressed spring, when it is released things can fly off at high speed. You can not compress water so it is safe providing all the air is removed from the system.

 

 

Additional information

Size

Small, Medium, Large

1 review for Hydraforce Standard Kit

  1. Rated 5 out of 5

    (verified owner)

    Awesome bit of kit! Superbly well made and very easy to use. It was harder to get the expansion chamber off the bike than get the dents out. And they dents came out so easily. Almost like the chamber was made of rubber. Mine even had dents on top of dents. The chamber doesn’t quite look like new because of how many dents I had, but it’s pretty much the correct shape again. If I’d had this when it first dented I reckon it would come out pretty perfect.

Add a review

Your email address will not be published. Required fields are marked *